空间等离子体云的回旋同步辐射

CME在行星际空间传播时, 会导致强磁场、高密度等离子体云的出现. 回旋同步辐射是此类等离子体的一种主要的射电辐射机制, 且携带行星际磁场的重要信息. 本文重点探讨了光深τν ≤1时回旋同步辐射的发射、吸收及极化特性, 包括热电子、非热电子, 投掷角各向同性、投掷角各向异性等离子体云的回旋同步辐射过程的研究分析. 在此基础上, 推导了考虑折射指数情况下, 辐射强度、辐射亮温的表达式.      

星座设计中避免卫星碰撞问题的研究

随着小卫星技术的发展 ,越来越多的航天任务采用小卫星星座来完成 ,在星座的设计过程中需要考虑的因素众多。本文从星座运行的安全性角度 ,分析了星座中卫星发生碰撞的机会和碰撞概率 ,对星座中存在的卫星之间可能发生的碰撞问题进行了研究 ,并提出了解决方法     

一种基于雷达波束驻留模式的空间碎片轨道参数估计方法

利用窄波束的单脉冲精密跟踪雷达波束驻留模式进行碎片探测是空间碎片环境统计特征描述的一种重要途径。由于该模式观测弧段极短,且无法获取同一目标的多个弧段,因而利用常规定轨方法难以达到理想的效果。在圆轨道假设下,提出了一种利用波束驻留模式获取的单个极短弧计算碎片轨道高度和倾角的方法。首先利用碎片的距离确定其轨道高度;在此基础上,根据推导出的不同波束指向时碎片的距离变化率与轨道倾角的关系,得出其轨道倾角。该方法对于正南、正东指向的雷达波束驻留模式均适用,其中正南指向时还需利用方位角和仰角数据来区分轨道倾角与补角;但不适用于波束指向天顶的情况。仿真结果验证了方法的有效性。     

雷达波束驻留模式下空间碎片数量的置信区间估计

碎片数量估计是空间碎片环境统计特征描述的重要内容之一,对于空间碎片环境模型验证、航天器碰撞风险分析以及碎片数量增长趋势预测有重要意义.针对波束指向正东、正南任意仰角的雷达波束驻留(Beam-park)模式(天顶指向是波束指向仰角为90°时的特例),给出了一种估计碎片数量置信区间的方法.对于给定轨道高度范围内一个具有穿越雷达波束可能性(即雷达散射截面足够大,且轨道倾角相对测站纬度足够大)的碎片,将其是否真正穿越波束这一随机事件用(0-1)分布来建模,根据所采集的轨道高度和倾角数据,计算出该轨道高度范围内碎片穿越波束的平均概率,进而采用中心极限定理来估计碎片数量的置信区间.仿真结果表明了方法的有效性.      

带电粒子云的演变过程

根据带电粒子云从破碎点开始向空间扩散过程中粒子云密度和形状的变化规律,以几何形状和起主要作用的因素为特征,定义了球形、椭球形、绳形、螺旋线形、全方位弥漫直至球壳形6个演变阶段.论述了在各个阶段的主要特征和对演变过程起主要作用的因素.分析了在各个阶段电磁场对带电粒子的摄动影响,比较了带电粒子云与不带电粒子云在演化过程上的差异.在球形阶段起主要作用的是分离速度,带电碎片之间的排斥力加快了碎片扩散的速度.从椭球形阶段到球壳形阶段,带电粒子和不带电粒子的演化规律基本一致.带电粒子的演化过程加快或减慢取决于粒子带正电或带负电.将电场摄动力等效于改变地球引力的大小,罗列了阶段转换标志点时刻的计算公式.利用计算机仿真的方法,给出了各个阶段不带电碎片云和带电碎片云分布示意图,验证了演变过程阶段划分和电磁场摄动分析的合理性.      

Ariane 5 GTO debris mitigation using natural perturbations

GTO objects can potentially collide with operative satellites in LEO and GEO protected regions. Internationally accepted debris mitigation guidelines require that these objects exit these protected regions within 25?years, e.g. by re-entering and burning up in Earth’s atmosphere. In this paper, an inventory of the GTO debris generated from Ariane 5 launches in the period 2012–2017 is provided, and it is expected that none of these objects will re-enter within 25?years. For future launches, natural perturbations can be exploited to increase compliance with mitigation guidelines without the use of extra propellant or complex de-orbiting systems, which is attractive from an economic point of view. The lifetime of GTO objects is very sensitive to initial conditions and some environmental and body-related parameters, mainly due to the effect of solar gravity on the perigee altitude. As a consequence, the lifetime of a specific GTO object cannot be predicted accurately, but its probability of re-entering in less than 25?years can be estimated with proper accuracy by following a statistical approach. By propagating the orbits of over 800,000 simulated Ariane 5 GTO objects, it was found that the launch time leading to the highest probability of compliance with debris mitigation guidelines for GEO launches from Kourou corresponds to about 2 PM local time, regardless of the date of launch, which leads to compliance rates ranging from 60 to 100%. Current practice is to launch at around 5–9?PM, so a change in procedures would be required in order to reach a higher degree of compliance with debris mitigation guidelines, which was predicted to be on average below 20% for the objects generated in the period 2012–2017.     

DebrisWatch I: A survey of faint geosynchronous debris

Recent anomalies exhibited by satellites and rocket bodies have highlighted that a population of faint debris exists at geosynchronous (GEO) altitudes, where there are no natural removal mechanisms. Despite previous optical surveys probing to around 10–20 cm in size, regular monitoring of faint sources at GEO is challenging, thus our knowledge remains sparse. It is essential that we continue to explore the faint debris population using large telescopes to better understand the risk posed to active GEO satellites. To this end, we present photometric results from a survey of the GEO region carried out with the 2.54 m Isaac Newton Telescope in La Palma, Canary Islands. We probe to 21st visual magnitude (around 10 cm, assuming Lambertian spheres with an albedo of 0.1), uncovering 129 orbital tracks with GEO-like motion across the eight nights of dark-grey time comprising the survey. The faint end of our brightness distribution continues to rise until the sensitivity limit of the sensor is reached, suggesting that the modal brightness could be even fainter. We uncover a number of faint, uncatalogued objects that show photometric signatures of rapid tumbling, many of which straddle the limiting magnitude of our survey over the course of a single exposure, posing a complex issue when estimating object size. This work presents the first instalment of DebrisWatch, an ongoing collaboration between the University of Warwick and the Defence Science and Technology Laboratory (UK) investigating the faint population of GEO debris.     

Material selection for a CubeSat structural bus complying with debris mitigation

The increasing number of commercial, technological and scientific missions for CubeSats poses several concerns about the topic of space junk and debris mitigation. As no regulation is currently in place, innovative solutions are needed to mitigate the impact that Low Earth Orbit objects can have during uncontrolled re-entry and the associated potential events of surface collision. We investigated the requirements, in terms of materials selection, for the development of a 3D-printed structural bus able to withstand loads during launch and in-orbit operations, with the objectives to be as light as possible and requiring the least amount of heat for demise during atmospheric re-entry. The selection indicated magnesium alloys as the best candidates to improve the reference material, aluminium 6061 T6, resulting in both mass-reduction and improved demisability. We also analysed how the relative importance of these two objectives can modify the selection of materials: if minimizing the heat to disintegration were valued more highly than lightness, for example, the new best candidates would become tin alloys. Our analysis, furthermore, suggested the importance of Liquid Crystal Polymer as the sole plastic material approaching the performance of the best metal choices. This contribution, thus, provides novel insight in the field of 3D-printed materials for the fast-growing CubeSat segment, complying with the debris mitigation initiatives promoted by space agencies and institutions.     

雷暴天气的分析识别及对飞行的影响

积雨云产生的雷暴作为航空安全最重要的天气之一,对它及时的从航空气象资料中获取,识别和分析,对保障飞行安全具有重要意义.从雷暴天气产生的机理讨论雷暴在卫星云图上的识别与分析,阐述雷暴天气对航班飞行过程中的影响及处置办法.     

Molecular Hydrogen

Observations of H₂ line emission in galactic and extragalactic environments obtained with the Infrared Space Observatory (ISO) are reviewed. The diagnostic capability of H₂ observations is illustrated. We discuss what one has learned about such diverse astrophysical sources as photon-dominated regions, shocks, young stellar objects, planetary nebulae and starburst galaxies from ISO observations of H₂ emission. In this context, we emphasise use of measured H₂ line intensities to infer important physical quantities such as the gas temperature, gas density and radiation field and we discuss the different possible excitation mechanisms of H₂. We also briefly consider future prospects for observation of H₂ from space and from the ground. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.